Beached Whale?

The first plug was given its first coat of epoxy today. The glistening covering makes it look like a beached whale, complete with dorsal fin and even a blowhole, thanks to the single remaining alignment hole.

The epoxy will cure overnight and then we can do more sanding.

Bonding First Plug

The first fuselage plug is now all bonded (glued) together. The first two blocks of foam were levelled to within a hundredth of an inch – less than the thickness of a piece of paper. This makes a perfectly flat foundation for the other blocks. This is also the centreline of the fuselage so getting this line straight is necessary so that the other parts of the aircraft will fit and it will fly straight.

The other blocks were then aligned onto the first pair, using alignment rods and careful measuring before the epoxy resin was poured.

Progress on first fuselage plug

The first fuselage plug has been completely machined. Einar has come up to Bend to view the progress.

The next step is to sand the plug by hand to remove the tool grooves and then it can be sealed with paint and the molding process begins.

Flight Computer Hardware

We may have found the perfect screen display to use in the Perlan glider. The Craggy Aero “Ultimate” computer is an exciting new development in soaring instruments.

The main advantage of this computer is the large sunlight-readable screen. We tested it outdoors in full sunshine against a conventional PDA. The Ultimate is the clear winner for readability, even though the PDA had a new “transreflective” screen.